We all know, machine vision inspection is largely applicated on one mass order product line, which could save much cost & time as well as speed up the efficiency; end-user shall install one model camera + one focal length lenses at one product line or a whole factory.

However, i believe you also heard that there are many different size product ( automotive parts or container ), low quantity products, the irregular object ... but, you need to measure all these objects or inspect it, how to to arrange your schedule ? Will you arrange your QC guys to check by humanbeing ? Will you change the lens focal length or working distance ? Are you headache for this products automatic inspection ?

Yes, now auto-focus bi-telecentric lenses need to be used SMZ-DM1105 below.

Download PDF : SMZ-DM1105

Even the different height of object or the irregular products, the auto-focus bi-telecentric lenses could focus it within short time <1ms speed, with stepping accurancy 0.02°, telecentricity 0.03°, and TV distortion 0.01%.

Never inspect object by humanbeing under industrial 4.0 era, you would be eliminated by the ERA in short time.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

We are focusing on CCTV lens, megapixel lenses, FA lens, machine vision lens, fisheye lenses, motorized zoom lens, computer vision lens, M12/M10/M8/M16 lens, Varifocal lens, manual iris lens, line scan lens, anti-vibration lens, 360 degree lens, mono-focal lens, CS lens, telecentric lens, bi-telecentric lens, ITS lens, pinhole lens, linear zoom lens, out-wall lens, as well as Mini IPC, Illumination / lighting, Industrial camera, Camera stand, PCI-E etc.